CC-6/12/18/24 Model: CC-6 / 12/18/24
主机+升降机座 Equipment composition: host + lift base
1. Applicable pipe diameter:
Ф34-168mm (CC-6) / Ф159-325mm (CC-12)
Ф325-480mm （CC-18） Ф457-630mm （CC-24）
2.Applicable wall thickness: ≤30mm
3. Applicable materials: carbon steel, alloy steel, stainless steel, etc.
： Cutting efficiency :
1. Feed amount: about 0.1mm / r.
2. Efficiency: Take 8mm pipe as an example, cut-off + bevel ≤ 3min; the overall efficiency is more than 5 times that of the outer card type electric beveling machine .
☆ clamping system: manual or electric multi-point self-centering clamping
☆ Rotary speed of cutter head: fixed speed or variable frequency speed regulation
☆ Bevel processing: electric rotary processing
☆ Motor power: 1.5KW / 2.2KW / 3.0KW / 4.0KW
☆ Input power: AC380V 50HZ
☆ Bevel type: V / U / double V type
☆ Feed method: radial automatic feed
1. It can be used for the standard groove processing of the end face of the pipeline, and it can also be used for cutting and groove processing of the middle position of the pipeline;
2. It can be directly welded after cutting without burrs and deformation;
3. Rotary cold cutting, rotating blade cutting along the periphery of the pipe, the cutting effect is impeccable, and the end face is 100% vertical;
4, can process any material pipe, such as carbon steel, stainless steel, alloy steel, etc .;
5. The use of multi-point self-centering circumferential clamping can effectively avoid pipeline clamping deformation;
6. The main body of the pipe cutting machine can be raised and lowered to meet the adjustment of the center elevation of pipes with different pipe diameters, which is simple to operate and easy to use;
7, compact structure, light weight, easy to carry, can be used for fixed use in the workshop, can also be used for on-site processing.
1. The machine is equipped with a 30º bevel carbon steel pipe as standard. If you need to process other materials such as stainless steel or other bevel forms, please specify before ordering.
2. The machine provides two kinds of clamping methods: manual self-centering clamping and electric self-centering clamping. The standard configuration is manual clamping. If electric clamping is configured, it must be explained before ordering.
3. The CC-6 model is equipped with a pipe with a diameter range of Ф60-168mm as standard; if the pipe needs to be processed to Ф34mm, it must be specified before ordering, and a pair of small-diameter jaws.
4.For the processing of stainless steel, alloy steel and other materials, it can be equipped with a coolant circulation system and a host frequency conversion speed regulation system.